Chapter 4. Web Management Interface
28
4.2.2 General Settings
Band: The operating wireless frequency band of the device. Choose among frequency band Disable, 802.11b,
802.11g or mixed mode 802.11b+802.11g.
Short Preamble: This option can be turned on to enable Short-Preamble frames.
Channel: Choose from channel 1 ~ 13, depending on the region or auto.
Max Transmit Rate: Choose transmit rate from the drop-down list. The maximum transmit rate can be set as
“auto” or specific available rate under the chosen operating mode (802.11b, 802.11g or 802.11b+g).
Transmit Power: Choose from Lowest Power to Highest Power level or auto.
The item in this page is for AP's RF settings and will be applied to all VAPs.
Normally, the available RF configurations can be illustrated as:
Mode Channel Rate Power
Disable NA NA NA
802.11b
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13
1M, 2M, 5.5M, 11M
802.11b+802.11g
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13
1M, 2M, 5.5M, 11M, 12M, 18M,
24M, 36M, 48M, 54M
Auto, Lowest, Low, Medium,
High, Highest
