Chapter 4. Web Management Interface
17
Chapter 4. Web Management Interface
This chapter provides further information on the NP725 configuration. The following table shows all the UI functions
of NP725 Access Point. In the web management interface, there are main interface areas: Main Menu and Working
Area. The Working Area occupies the largest area of the web interface in the center. It is also referred as the
current management page. The current management is the page where status is displayed, where controlled is
issued and parameters are configured. Main Menu, on the top of the web management interface, allows
administrators to traverse to various management functions of this system. The management functions are grouped
into branches: System, AP, WDS, Utilities and Status.
OPTION FUNCTION
System Information
Network Settings
System
Management Services
Virtual AP Overview
General Settings
VAP Configuration
Security Settings
Advanced Wireless Settings
AP
Access Control Settings
WDS Link Overview WDS
WDS Link Settings
Change Password
Configuration Save/Restore
System Upgrade
Utilities
Reboot
System Overview
Associated Client Status
WDS Link Status
Status
Event Log
Caution: After finishing the configuration, please click Apply and pay attention to see if a restart message appears
on screen. If the message appears, the system must be restarted to allow the settings to take effect. All on-line users
will be disconnected during restart.
