Using the Pop-up Menus
Multicap 9 User Guide 3-15
3.3.3 Pop-up From a Selected Wire
If you right-click on a selected wire on the circuit window, a pop-up menu of appropriate
commands appears. These commands are:
3.3.4 Pop-up From a Selected Text Block or Graphic
If you right-click on a selected text block or graphic element in the circuit window, a pop-up
menu of appropriate commands appears. These commands are:
Command Description
Delete Deletes the selected wire from the workspace.
Wire Color Changes the color of the selected wire from its default value.
Segment Color Changes the color of the selected wire segment from its
default value.
Font Changes the font of various elements on the workspace from
their default values. For details, see “3.4.2.4 Sheet
Properties - Font Tab” on page 3-28.
Properties Displays the Net dialog box. “4.9.2 Modifying Net Names” on
page 4-35.
Command Description
Delete Deletes the selected item.
Flip Horizontal Flips the selection horizontally. For details, see “4.7 Rotating/
Flipping Placed Components” on page 4-30.
Flip Vertical Flips the selection vertically. For details, see “4.7 Rotating/
Flipping Placed Components” on page 4-30.
90 Clockwise Rotates the selection 90 degrees clockwise. For details, see
“4.7 Rotating/Flipping Placed Components” on page 4-30.
90 CounterCW Rotates the selection 90 degrees counterclockwise. For
details, see “4.7 Rotating/Flipping Placed Components” on
page 4-30.
Pen Color Changes the color of the selected item from its default value.
