32
2 USING THE SCREENMANAGER
1)Select the “Off Timer” icon and press the Enter
button to display “Off Timer” select menu.
2) Select “Enable” and press the enter button.
3) Press the right/left key to adjust how long (1 to 23
hours) the monitor should be in the “On Period”.
Then, press the enter button to return to the
“others” menu.
4) Select the “Exit” icon and push the Enter button
to exit the ScreenManager.
Advance notice (Beep and LED flashing green) will
be given 15 minutes before the monitor will
automatically turn off and enter the “Power Off”
modes .
·“Off Timer” function works while Power Manager is
active, but there would be no advanced mode
before the monitor's power’s switching off.
To Delay Entering Power Off
To delay entering the “Power Off” mode, press the
power button on the front panel located to the left of
the LED light during the advance notice period. The
monitor will continue to operate for an additional 90
minutes. There will be another advance notice for
15 minutes as described. Delayed entrance into the
“Power Off” period can be extended as many times
as desired.
Function
Beep
Turns the beeper on or off.
· ScreenManager item selected.
· ScreenManager parameter adjusted
to minimum or maximum limit.
· Input signal selection button pressed.
· Auto Adjustment button pressed.
· ScreenManager data-save executed.
· Monitor not connected correctly.
· PC turned off.
· Monitor received unsupported signal
frequency.
· Monitor is in the advance notice mode
of the Off Timer. The power will be
off within fifteen minutes.
Short beep
Long beep
Four short
beeps
Two short
beeps
every
fifteen
seconds
