Technical Specifications Appendix A
MPC User Manual Rev 0D 77
A.2 MPC Specifications
MPC CARDS
There are 5 cards in the MPC Euro4 GPS, Computer, Clock, Power, and Modem
INPUT/OUTPUT CONNECTORS
GPS Antenna Input TNC female jack, 50 Ω nominal impedance
+4.25 to +5.25 V DC, 90 mA max
(output from MPC to antenna/LNA)
Frequency: L1(1575.42 MHz), L2 (1227.6 MHz)
Power Input 3-pin A/C chord provided (for North American Standard A/C)
Voltage: 100 to 240 VAC
Frequency: 50 to 60 Hz
Warm-up power: 34 W
Typical power: 30 W
Fuse: 1.5 A
DGPS
PPP
Ethernet
Modem
DE9P connector
DE9P connector
RJ45 jack
a
RJ11 jack
a. An Ethernet connection can only be made with an RJ45 cable. An RJ11 cable will fit into the
Ethernet port but a connection cannot be established.
Individual BNC connectors are described on the next page.
ENVIRONMENTAL
Operating Temperature -40°C to +50°C (receiver)
Storage Temperature -45°C to +85°C
Humidity Not to exceed 90% non-condensing
PHYSICAL
Size (without handle) 148 mm x 258 mm x 365 mm (6” x 10” x 15”)
Weight 6.35 kg (14 lb.)
