MPC User Manual Rev 0D 49
Chapter 6 Software Programs
The MPC software for the Euro4 GPSCard and the VFD are already installed.
The Modulated Precision Clock website is accessible on a PC via an internet connection. It is your
source for MPC setup, logging, system summaries and analysis plots. Details are given in Section 6.1,
Modulated Precision Clock Website starting below.
Please see Section 6.2, MPC Firmware Upgrades & Updates starting on Page 75 for a description on
how your MPC is upgraded/updated via the web. See also Customer Service on Page 10.
6.1 Modulated Precision Clock Website
To access the Modulated Precision Clock home page, use the IP address given by your internet
provider, as displayed by the VFD or provided by your Network Administrator, to use as a URL for
your MPC receiver using a PC. The following is a fictional example:
http://123.123.123.123/
Your Network Administrator may wish to provide you with a “STATIC” IP location on your internal
network (intranet) and associate this IP address with a name, for example “MPC1”, in your Domain
Name Server (DNS). In this case, you would access your MPC’s web page via the URL:
http://mpc1/
See also the Connect and Config menu sections of Chapter 5, VFD Menus starting on Page 44, and
Section 4.2, Configuring the Network on Page 25, for information on configuring your MPC and
connecting to the internet using the VFD menus.
Figure 43: Modulated Precision Clock Home Page
