A SERVICE OF

logo

Open as PDF
next previous
Using the MPC Chapter 4
MPC User Manual Rev 0D 31
Figure 15: Select Network Service
Select Remote Access Service and ensure your operating system install disk is in the PC disk drive.
Click on the Have Disk button and the Add RAS Device dialog will appear as seen in Figure 16.
Figure 16: Add RAS Device
Select your connection in the RAS Capable devices field and click on the OK button. The Configure
Port Usage dialog will appear as seen in Figure 17
Figure 17: Configure Port Usage
Click in the Receive Calls Only field and then click on the OK button. The Network Configuration
dialog will appear as seen in Figure 18 on Page 32.