9 Demounting Demounting the Pump
© 2007 Moog GmbH User Manual RKP-II (CA53461-001; Version 1.0, 10/07) 55
9 Demounting
Demounting
9.1 Demounting the Pump
Demounting the Pump
For pumps in explosive areas, the supplementary documentation should
also be observed:
Ö User Manual RKP II Explosion-Proof
For any and all tasks to be performed on the pumps, appropriate personal
protective equipment should be worn.
Ö Chap. "2.2.4 Work Safety", Page 9
In this segment, instructions are given on how to dismantle the pump to
prepare it for shipping to us or to one of our authorized service locations
for pump repairs to be performed and not on how to disassemble the
pump.
WARNING Risk of crushing!
During demounting, the pump may topple over and crush body
parts.
• Select lifting gear appropriate for the overall weight of the
pump.
• Attach the lifting gear to the pump properly.
Ö Chap. "5.2 Transporting the Pump", Page 29
• Avoid all areas below the floating load.
WARNING Risk of injury and poisoning by dangerous operating fluid!
Leaks from dangerous operating fluid may lead to serious
injuries.
• Check to ensure that the operating fluid in use does not
pose a risk.
• Make sure that the machine / equipment is at zero
pressure and zero voltage.
• Wear protective work equipment such as, e. g., work
gloves. Ö Chap. "2.2.4 Work Safety", Page 9
WARNING Risk of death by electrocution!
Contact with live parts may lead to severe injuries and even
death.
• Make sure that the machine / equipment is at zero
voltage.
CAUTION Damage to property from contamination!
Missing end caps to the pump connections may lead to
contamination and resulting damage to property.
• Replace the end caps immediately after demounting the
lines on the pump.
