Filename [MX1S_06DVD Operation.fm]
Masterpage:Left+
32 EN
BASIC OPERATIONS ON DVD DECK
Page 32Saturday, 30 October 2004 16:18
This unit records pictures onto the DVD-RAM discs, instead of
video tapes, then plays back the pictures recorded on the discs.
This makes it possible to achieve high-speed writing and read-out
that has not been possible with conventional VCRs, enabling
recording and playback simultaneously.
It is called “Live Memory Playback” to start playback of the
program being recorded, with a time-lag between a recording point
and a playback point, as shown in the figure below.
Not only can this unit play back a program previously recorded
while recording or timer recording another program, but the unit
also allows you to play back from the beginning of a program while
continuing to record the same program.
Recording/playback Status Display
Press ON SCREEN. The current status is superimposed on the TV
screen.
Live Memory Playback
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Press DVD so that the DVD lamp lights up on the unit.
Playback
(High-speed read-out)
Recording
(High-speed writing)
High-speed spin
Image figure of DVD-RAM disc
Current recording position
(Recording point)
Recording start point
Current playback point
(Live Memory Playback)
0 30 min. 1 hour
Playback
continues
Recording
continues
Currently elapsed recording time
ON SCREEN
LIVE
CABLE/DBS
DVDTV
Live Memory Playback status can be checked by
pressing ON SCREEN to display the bar meter on
the superimpose display.
Bar meter display
Superimpose display
MX1S_00.book Page 32 Saturday, October 30, 2004 4:18 PM
