A SERVICE OF

logo

Engineering Guideline EH-150 Series PLC
Accessories
System Configuration
9
I/O controller module for expansion rack
I/O controller module for mounting on the CPU-Slot of the expansion rack.
Connecting cable between base rack and I/O controller
Cable to connect the I/O controller EH-IOC with the connector on the right
side of the base rack.
Dummy module
Dummy module to cover not used slots on base and expansion rack.
Battery
Battery for the CPU to keep the contents of the retentive area and the RTC
running while the power is switched of.
Cables
Programming cable to connect the serial communication ports of the CPU's
to a 9-pole Sub-D serial interface of a PC (lenght 2m).
Communication cable between the serial communication ports of the CPU's
to an HMI of Hitachi's EH-HMI series (lenght 3m).
Ready-to-use connecting cable for the 32- and 64-point I/O modules with
dedicated plug on one end, open on the other end (lenght 4m).
Ready-to-use connecting cable for the Counter-modules with dedicated
plug on one end, open on the other end (lenght 4m).
EH-HEH30
EH-32XY04
Type
EH-CUCN40
EH-IOC
EH-CB10
EH-DUM
LIBAT-H
Type
Type
Type
Type
EH-PROG20