A SERVICE OF

logo

21. If you are going to seal the cartridge, there is a white plas-
tic shelf that needs to be removed. The shelf is held on with
double sided tape. It can be gently pried off with a small screw-
driver.
22. Re-install the white plastic shelf. If the adhesive is not
working, replace it with a good double sided tape. This shelf
helps with the flow of toner in the hopper.
23. Re-install the doctor Blade and two screws. 24. Clean the old grease off the contact plate, and replace
with new conductive grease.
HP P2035 2055 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA Ph +1 424 675 3300 Fx +1 424 675 3400 techsupport@uninetimaging.com www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.