Alea Systems, Inc. Rev.1.13 Pingo-Photo Rep
User manual
15.2 Align the CD Printer and run system diagnostics
Before the Pingo Photo Rep can be successfully operated you have to verify that:
• Power cord is inserted in its receptacle
• CD Printer, COM1 and COM2 cables are properly connected to the PC and to the Pingo Rep.
• The Pingo Rep program has been successfully installed in you Windows 98, ME, XP, 2000 or NT
To start the Pingo Rep system, please follow this sequence:
• Switch the Pingo Rep power on.
• Switch on the power to the printer.
• Turn on the computer and get to the desk top.
• From the desktop of the computer, click the Pingo Rep icon
• The Pingo Rep application screen will now be displayed:
• If the Pingo Rep is unable to detect the hardware, the following screen is displayed:
Pingo-Photo Rep.LNK
