17
Assembly
Wire Cover
Switch
Switch
Peg
• Fit the wrapped portion of the handlebar harness into
the wire cover.
• Fit the tab on the wire cover into the notch in the switch
to lock the two parts together.
Handlebar
Harness
25
Right
Handlebar
• Locate the right handlebar. The right handlebar has an
additional hole in the grip area.
• Fit the switch to the right handlebar, making sure the
screw hole in the switch aligns with the screw hole in
the right handlebar.
Switch
Cover
26
• Fit the peg on the right mirror through the hole in the
right handlebar and the switch.
• While holding the two parts firmly together, insert
two #8 x
3
/4" screws into the switch and tighten.
28
Wire
Cover
Tab
Switch
Notch
Additional Hole
in Grip Area
Right Handlebar
•Fit a mirror lens to the right mirror.
•Insert a #8 x
1
/
2
" screw through the right mirror into the
mirror lens. Tighten the screw.
• Repeat this procedure to assemble the other mirror lens
to the left mirror.
Right Mirror
Mirror Lens
27
Back View
