2-2
Description 2
Single-syringe Model
Single-syringe Model
The Single-syringe model has a Valve module at the
left, and a blanking plate at the right.
The Valve module includes one motor to operate
the syringe and another motor to switch the valve.
It is a liquid transfer station that can be used to
deliver up to 25 mL in one stroke, and down to 1 µL
(typical value), with high accuracy.
Front Panel
The front panel holds the hydraulic components
and is fitted with an ON/OFF indicator.
Rear Panel
The rear panel holds a socket for connecting the
keypad, a connector for the probe, the ON/OFF
switch, and voltage selector/fuse holder. There is
also a Gilson Serial Input Output Channel (GSIOC)
connector, which is a communications channel to
link the 402 Dilutor-Dispenser with other equipment,
if required. There is also a bank of microswitches
for use in setting up the communications channel.
Bottle Clip for Tubing
Tubing Clip (Self-adhesive)
Cable Support
Clamp for Probe
Valve Module
ON/OFF Switch
Microswitches
ON/OFF indicator
