IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 39
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Input Configuration Commands
Input video format
Set video format
X!*X#\ TypX!*X#] Set input X! to format X#.
View set format
X!\ X#]
View the video format.
Input EDID (VGA and HDMI)
Assign EDID to input
EAX!*X5(EDID} EdidAX!*X5(] Assign EDID X5( to input X!.
View assigned EDID
EAX!EDID} X5(] View the EDID for input X!.
Save an output EDID to
custom slot
ESX@*X5(EDID} EdidSX@*X5(] Save output X@ EDID to X5(
(3-8, 201, 202).
Export EDID file
EEX5(,<filename>EDID} EdidEX5(] Export X5( (1-92, 201, 202)
EDID.
Import EDID file
EIX5(,<filename>EDID} EdidIX5(] Import X5( (3-8, 201, 202)
EDID.
NOTES:
• <lename> can optionally carry a full path name. The EDID file is a .bin file, carrying 128 or 256 bytes of
binary data.
• Exporting a default EDID table (for an X5( value of 10 or greater) results in the HDMI LPCM-2Ch table
being exported.
Input name
Write input name
EX!,X1$ NI} NmiX!,X1$] Rename input X!.
View input name
EX! NI} X1$] View the name of input X!.
NOTE: To clear an input name, enter a single space character for X1$. This resets the input name to the
default.
NOTES:
X! = Input selection 1-6 (IN1606) or 1-8 (IN1608 models)
X@ = Output selection 1 = HDMI A (top connector)
2 = HDMI B (bottom connector)
3 = DTP C (IN1608 models)
X# = Input video format 1 = RGB
2 = YUV
3 = RGBcvS
4 = S-video
5 = composite
6 = HDMI
X1$ = Input name (text label) Up to 16 characters
X5( = EDID emulation See the X5( definition on page 37.
