IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 35
X3!
= Video switching effect
0 = cut
1 = fade through black (default)
X3@
= HDMI output format
0 = auto (based on the display EDID: default)
1 = DVI RGB 444
2 = HDMI RGB “Full”
3 = HDMI RGB “Limited”
4 = HDMI YUV 444 “Full”
5 = HDMI YUV 444 “Limited”
6 = HDMI YUV 422 “Full”
7 = HDMI YUV 422 “Limited”
X3#
= Default name A combination of model name and the last three pairs
of the device MAC address (for example, IN1606-
07-8C-EC)
X3%
= Audio input type
0 = none (input muted)
1 = analog (default for inputs 1 and 2)
2 = LPCM-2Ch digital (default for inputs 3-6)
3 = Multi-Ch digital
4 = LPCM-2Ch digital auto
5 = Multi-Ch digital auto
X3^
= Video signal status
0 = video or HDMI signal not detected
1 = video or HDMI signal detected
X3&
= Power save mode
0 = full power mode (default)
1 = lower power state
X3*
= Screen saver status
0 = active input detected, timer not running
1 = no active input, timer running, output sync
still active
2 = no active input, timer expired, output sync
disabled
X3(
= HDCP authorization status
0 = block HDCP encryption
1 = allow HDCP encryption (default)
X4)
= IP address
xxx.xxx.xxx.xxx
(192.168.254.254 = default)
X4!
= Subnet mask
xxx.xxx.xxx.xxx
(255.255.0.0 = default)
X4@
= Gateway address
xxx.xxx.xxx.xxx
(0.0.0.0 = default)
X4#
= MAC address
00-05-A6-xx-xx-xx
X4$
= Number of open
connections
0-<maximum number of open connections>
X4%
= Config type 0 = IP config
1 = device-specific parameters
X4^
= Volume group number
1 = program volume
3 = mic volume
8 = variable volume
X4&
= Group volume level
-1000 to 0, where -1000 = -100 dB or 0% volume
and 0 = 0 dB or 100% volume
X4*
= Mute group number
2 = program mute
4 = mic mute
7 = output mute
X4(
= Bass and treble group number
5 = bass control
6 = treble control
X5)
= Bass and treble level
-240 to +120, where -240 = -24 dB and
+120 = 12 dB
