8
Turning On the Projector
Procedure
1
Make sure the power is off for all
components connected to the
projector.
2
Remove the lens cover.
3
Connect the video source or computer
to the projector (see Quick Setup).
4
Connect the power cord to the
projector.
Check that the power cord connector is facing the
same way as the power inlet on the projector, and
then insert the power cord securely into the
projector.
5
Connect the other end of the power
cord to a grounded electrical outlet.
Wait until the Power indicator lights orange.
Connecting the Power Cable
The projector's control panel and remote
control buttons cannot be operated while
the Power indicator is flashing orange.
Be sure to read the Important Safety Instructions starting on p.44 before projecting images.
Power
Lit orange
