A SERVICE OF

logo

30 Setting Up the Projector
Connecting Using a BNC Cable
1. Locate a BNC video cable (one may be included with your video
equipment).
2. Connect the cable between your player and the corresponding
R/G/B connectors on the projector.
3. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB (see page 99).
4. If you want to play sound through the projector, see page 32 for
instructions on connecting audio cables.
5. If you don’t need to make any other connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.