DXS/DWS 3200 Series User Guide
Page 178
– VLAN — Indicates the VLAN for which ARP parameters are defined.
• IP Address — Indicates the station IP address, which is associated with the MAC address filled in below.
• MAC Address — Displays the station MAC address, which is associated in the ARP table with the IP
address.
• Status — Displays the ARP table entry type. Possible field values are:
– Dynamic — Indicates the ARP entry is learned dynamically.
– Static — Indicates the ARP entry is a static entry.
• Remove — Removes a specific ARP entry. The possible field values are:
– Checked — Removes the selected ARP entries.
– Unchecked — Maintains the current ARP entries.
2. Define the ARP Entry Age Out and Clear ARP Table Entries fields.
3. Click . The ARP parameters are defined, and the device is updated.
To create a new ARP entry:
1. Click Basic Setup > IP Configuration > IP Addressing > ARP. The ARP Page opens.
2. Click . The ARP Settings Page opens:
Figure 113:ARP Settings Page
3. Define the fields.
4. Click . The ARP interface is added, and the device is updated.
