Defining WLAN
Configuring WLAN Radio Settings
Page 157
– Half — Defines half of the maximum power relative to the selected country’s device power regulations.
– Quarter — Defines a quarter of the maximum power relative to the selected country’s device power
regulations.
– Eighth — Defines an eighth of the maximum power relative to the selected country’s device power
regulations.
– Minimum — Sets the power to the minimum power settings relative to the selected country’s device
power regulations.
• Auto Adjust Signal Strength — Adjusts the transmit power of APs, so the signal strength heard at the sec-
ond-closest access point is as close as possible to the target signal-strength configured by the wlan tx-power
auto signal-strength global configuration command. Auto Transmit Power can be enabled only when rogue
detection is enabled
• User's Traffic — Determines if user traffic is enabled for this radio. The possible field values are:
– Enable — Enables user traffic on the radio frequency. This is the default value.
–Disable— Disables user traffic on the radio frequency.
• Scan for Rogues — Indicates the rogue scanning status. The possible field values are:
– Enabled — Indicates that rogue scanning is enabled.
– Disabled — Indicates that rogue scanning is disabled.
2. Click . The Modify Radio Setting Page opens.
3. Modify the fields.
4. Click . The radio settings are modified, and the device is updated.
