> Changing the Machine Settings > Changing the Machine Settings on the LCD
> LAN settings
LAN settings
Change wireless/wired
Activates/deactivates wireless LAN.
Note
When you change the connection method (wired or wireless), set up the machine according to
the method you will use. For details, refer to your setup manual.
Wireless LAN setup
Selects the setting method for wireless LAN connection.
Note
You can enter this setting menu by following the procedure below:
1. Select Settings on the HOME screen, then press the
OK
button.
2. Select Wireless LAN setup.
In this case, activate wireless LAN.
Easy settings
Select when you perform settings for wireless LAN manually.
WPS settings
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select
Push button method or PIN method according to the method your access point supports, then
follow the on-screen instructions.
WCN settings
Select when you perform settings for wireless LAN using Windows Connect Now (WCN)
feature. You need a USB flash drive on which settings for wireless LAN are saved.
Confirm LAN settings
The list of wireless/wired LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.
Wireless LAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Setting (IPv4) Setting (IPv6)
Connection
Active/Inactive Active/Inactive
SSID
Communication
mode
Infrastructure Infrastructure
Channel
Wireless LAN
security
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
IP address
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
Subnet mask
-
Subnet prefix
length
-
Default gateway
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
Page 793 of 988 pagesLAN settings
