>
Printing on DVD/CDs
>
Printing on the Label Side of DVD/CDs > Printing from a PictBridge Compliant
Device
Printing from a PictBridge Compliant Device
This section describes how to print photos on DVD/CDs (printable discs) from a PictBridge compliant
device.
Important
Depending on your PictBridge compliant device, you may not be able to print on the label side of
DVD/CDs.
For details, refer to your PictBridge compliant device's instruction manual .
You cannot print on 8 cm DVD/CDs.
1.
Make sure that the machine is turned on.
2.
Connect the PictBridge compliant device to the machine using a USB cable
recommended by the manufacturer of the device.
For details, refer to
Printing Photographs Directly from a Compliant Device
.
3.
Specify the print settings as follows.
Paper size: 12cmDVD/CD
Paper type: Default
Layout: Bordered or Default
You can perform image optimize settings using the menu on the LCD of your PictBridge compliant
device. For details, refer to
About PictBridge Print Settings
.
Note
If your PictBridge compliant device does not have setting menu, change the setting from the
machine.
Specifying the PictBridge Print Settings on the Machine
4.
Set the printable DVD/CD.
Attaching/Removing the CD-R Tray
5.
Start printing from your PictBridge compliant device.
Specifying the PictBridge Print Settings on the Machine
You can specify the PictBridge print settings on the machine.
Note
When a PictBridge compliant device is connected to the machine, the PictBridge print
settings screen can also be displayed by pressing the left Function button.
1.
Make sure that the machine is turned on.
2.
Select
Settings on the HOME screen, then press the
OK button.
The Settings screen is displayed.
3.
Select
Device settings, then press the
OK button.
Page 709 of 988 pagesPrinting from a PictBridge Compliant Device
