Printing Network Settings
Use the operation panel to print the machine's current network settings.
Important
• The network settings printout contains important information about your network. Handle it with care.
1.
Make sure machine is turned on.
2.
Load two sheets of A4 or Letter-sized plain paper.
3.
Press and hold Wi-Fi button and release it when ON lamp flashes.
4.
Press Wi-Fi button again.
The machine starts printing network settings information.
The printed network settings information is as follows:
Item Description Setting
Product Information Product information –
Product Name Product name XXXXXXXX
ROM Version ROM version XXXXXXXX
Serial Number Serial number XXXXXXXX
Wireless LAN Wireless LAN Enable/Disable
MAC Address MAC address XX:XX:XX:XX:XX:XX
WPS PIN CODE WPS PIN code XXXXXXXX
Infrastructure Infrastructure Enable/Disable
Connection Connection status Active/Inactive
SSID SSID Wireless LAN SSID
Channel *1 Channel XX (1 to 11)
Encryption Encryption method None/WEP/TKIP/AES
WEP Key Length WEP key length (bits) Inactive/128/64
Authentication Authentication method None/auto/open/shared/WPA-PSK/WPA2-PSK
Signal Strength Signal strength 0 to 100 [%]
TCP/IPv4 TCP/IPv4 Enable
IP Address IP address XXX.XXX.XXX.XXX
Subnet Mask Subnet mask XXX.XXX.XXX.XXX
239
