114
Appendices
Can’t start CanoCraft FS from within another application
Cause: Scanner settings not correctly set in the application program
Solution: Correct the scanner settings in the application program. See
the manual for the application program for instructions.
[CanoCraft FS or CanoCraft FS Copy is running. Close it and run this
program] message displays
Cause1: You attempted to start CanoCraft FS when CanoCraft FS
Copy was already running
Solution1: Close CanoCraft FS Copy before starting CanoCraft FS.
Cause2: You attempted to start CanoCraft FS Copy when CanoCraft
FS was already running
Solution2: Close CanoCraft FS before starting CanoCraft FS Copy.
Problems with Scanning
[Initializing film scanner. Please remove film] message displays
Cause 1: Scanner power turned on with a film already inserted
Solution: Remove the film and follow the instructions on the screen.
Cause 2: Set period of time passed without scanner being operated
after power turned on
Solution: Remove film and follow the instructions on the screen.
Image is vertically or horizontally inverted
Cause: Film is inserted upside down or backwards
Solution 1: Insert the film with the correct orientation. (Getting Started
Guide)
Solution 2: Click the Rotate/Flip button and change the orientation of
the image. (p. 39)
Brightness of preview image and scanned image are different
Cause: Display brightness settings are incorrect
Solution: Adjust display brightness settings. (Display manual)
