A SERVICE OF

logo

Baracoda DualRunners – User Guide v1.7 - 13 -
Data Capture
for Workforce
in Motion
6.5.5 Barcode Identifier
The scanner can transmit a maximum of 3 digit barcode identifier codes for different types of barcodes
(symbologies).
If the option is selected, the Barcode Identifier is added at the beginning of the barcode frame.
List of identifier codes can be found in the Programming Guide. You can activate barcode identifier through
BaracodaManager software or with the Programming Guide.
The barcode identifier is disabled in default settings.
6.5.6 RFID Protocol Identifier
The reader can transmit a maximum of 3 (three) digit RFID Protocol Identifier codes for different types of RFID
protocols. You can activate RFID Protocol Identifier through BaracodaManager software (v3.36 min). The RFID
Protocol Identifier is disabled in default settings.
If the option is selected, the RFID Protocol Identifier is added at the beginning of the data frame.
List of RFID Protocol Identifier codes can be found in the following table:
I
dentifier
Associated
RFID
protocol
[A]
ISO/IEC 14443
-
A (or NXP Mifare)
[B]
ISO/IEC 14443
-
B
[C]
ISO/IEC
15693 (e.g. TI Tag
-
it or NXP ICODE
-
SLI)
[D]
NXP ICODE
-
1
[E]
Inside Contactless Pico
TAG
[F]
S.T. MicroElectronics SR
[G]
ASK CTS256B/CTS512B
[H]
Calypso (Innovatron protocol)
[I]
EPC HF Version 2
[Z]
Unknown