Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 91
Set port vlan-binding-mode Command
Use the set port vlan-binding-mode command to define the binding method
used by ports.
The syntax for this command is:
set port vlan-binding-mode [port_list] [value]
Example:
P130-1# set port vlan-binding-mode 1/5-15 static
Set Port vlan binding method:1/5
Set Port vlan binding method:1/6
.
Show port vlan-binding-mode Command
Use the show port vlan-binding-mode command to display port vlan binding
mode information.
The syntax for this command is:
show port vlan-binding-mode
Example:
P130-N> show port vlan-binding-mode
port 1/1 is statically bound
port 1/2 is statically bound
etc.
port_list module and ports to bundle (format: module/port)
value static - the port supports only the egress VLAN list as
configured
bind-to-configured - the port support the whole range of
VLANs on the device
