6-44 LAN Interface Supplement
Controlling the Analyzer via the LAN
Controlling the Analyzer using SICL LAN
Configuring Your Analyzer as a SICL LAN
Server
After you have collected the required information from the SICL LAN
client, perform the following steps to set up your analyzer as a SICL LAN
server:
1. Enter the GPIB name
Press
, enter the GPIB name from the SICL LAN client, and
press . Press if you need to replace the
existing entry.
2. Enter the GPIB logical unit number
Press , enter the GPIB logical unit number from the
SICL LAN client, and press .
3. Enter the GPIB device address
Press , enter the GPIB device address from the
SICL LAN client, and press .
If you want to restore the default settings, press .
4. Turn the analyzer off, then on.
Configuring Your PC as a SICL LAN Client
The descriptions here are based on HP’s VISA revision G.02.02, model
number HP2094G. A copy of HP’s VISA can be found on the following
website:
http://www.tm.agilent.com/tmo/software/English/HP_IO_Libraries.
html.
These descriptions assume a LAN connection between your computer
and network analyzer. They are not written for the GPIB-to-LAN
gateway.
1. Install HP VISA revision G.02.02 or higher.
2. Run I/O configuration.
3. Select LAN Client from the Available Interface Types.
4. Press Configure.
SYSTEM OPTIONS
