Chapter 4 155
Making Measurements
Using Baseband I/Q Inputs (Option B7C)
Baseband I/Q Measurement Overview
To make measurements using Baseband I/Q Inputs, you must make the
following selections:
• Select a measurement that supports baseband I/Q inputs. For details
see “Making Measurements with Baseband I/Q Inputs” on page 154
for details.
• Select the appropriate circuit location and probe(s) for
measurements. For details see“Selecting Input Probes for Baseband
Measurements” on page 156.
• Select baseband I/Q input connectors. For details see “Selecting
Baseband I/Q Input Connectors” on page 159.
• Adjust I/Q Setup if desired. For details see “Setting Up Baseband I/Q
Inputs” on page 161.
• Select baseband I/Q input impedance. For details see “Selecting
Baseband I/Q Input Impedance” on page 164.
• Select a Baseband I/Q measurement results view. For details see
“Baseband I/Q Measurement Views” on page 165.
