3-73
Function Reference
Reset Min/Max Hold
Reset Min/Max Hold
Resets trace hold data and returns to the Traces function keys where you can
select an active trace, trace input, update, view, and hold functions.
Key Path Traces > Hold (trace) > Reset Min/Max Hold
Remote
Commands
CALCulate[1|2|3|4|5|6]:MAXimum:CLEar
CALCulate[1|2|3|4|5|6]:MINimum:CLEar
CALCulate[1|2|3|4|5|6]:MAXimum:STATe
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Restore Internal Memory
Accesses the instrument restore utility. This operation will remove all existing
files from internal memory (that is, measurement, trace, and specification
sets) and replace them with files from a floppy disk. These files are created
using the Backup Internal Memory function. See “Backing Up or Restoring the
Internal Memory” on page 2-20
Key Path Save/Recall > Backup/Restore Menu > Restore Internal Memory
Revision
Displays the instrument’s firmware revision information. See “Help” on
page 3-31 and “Firmware Upgrade” on page 3-30.
Key Path System > Help > Revision
Remote
Commands
*IDN?
