62 Model 55i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
Setting a Line Key
You can set a key as an additional line on the 55i. The key acts as a line that behaves
the same as a hard line key. For more information about the behavior of line keys, see
"Multiple Line and Call Appearances" on page 52.
You use the Aastra Web UI to set a key as a line.
Use the following procedure to set a key to function as a line. The procedure shows
the softkey screens as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
2. For softkeys, select from "Key 1" through "Key 20".
or
For programmable keys, select from "Key 1" through "Key 6".
3. In the "Type" field, select Line to apply to the key.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Line" field, select a line to apply to this key.
Valid values are 5 through 9.
6. If configuring a softkey, in the state fields, check (enable) or uncheck (disable) the
states you want to apply to this softkey.
7. Click to save your changes.
Aastra Web UI
