set dot1x reauth-period 515
set dot1x
reauth-period
Sets the number of seconds that must elapse before the WX switch
attempts reauthentication.
Syntax —
set dot1x reauth-period seconds
seconds — Specify a value between 60 (1 minute) and 1,641,600
(19 days).
Defaults — The default is 3600 seconds (1 hour).
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to set the number of seconds
to 100 before reauthentication is attempted:
WX4400# set dot1x reauth-period 100
success: dot1x auth-server timeout set to 100.
See Also
display dot1x on page 505
clear dot1x reauth-period on page 503
set dot1x timeout
auth-server
Sets the number of seconds that must elapse before the WX switch times
out a request to a RADIUS authentication server.
Syntax —
set dot1x timeout auth-server seconds
seconds — Specify a value between 1 and 65,535.
Defaults — The default is 30 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to set the authentication
server timeout to 60 seconds:
WX4400# set dot1x timeout auth-server 60
success: dot1x auth-server timeout set to 60.
