504 CHAPTER 17: 802.1X MANAGEMENT COMMANDS
clear dot1x timeout
auth-server
Resets to the default setting the number of seconds that must elapse
before the WX times out a request to a RADIUS server.
Syntax —
clear dot1x timeout auth-server
Defaults — The default is 30 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the default timeout for requests to an
authentication server, type the following command:
WX4400# clear dot1x timeout auth-server
success: change accepted.
See Also
display dot1x on page 505
set dot1x timeout auth-server on page 515
clear dot1x timeout
supplicant
Resets to the default setting the number of seconds that must elapse
before the WX switch times out an authentication session with a
supplicant (client).
Syntax —
clear dot1x timeout supplicant
Defaults — The default for the authentication timeout sessions is
30 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the timeout period
for an authentication session:
WX4400# clear dot1x timeout supplicant
success: change accepted.
See Also
display dot1x on page 505
set dot1x timeout supplicant on page 516
