3
I
NSTALLING
A
C
ORE
B
UILDER
7000
F
AMILY
AT M S
WITCH
This chapter contains instructions for installing the CoreBuilder
®
7000
family ATM switch on a table top or in a distribution rack and making the
necessary hardware connections. The topics covered in this chapter
include:
■
Safety Precautions
■
Preparation
■
Table Top Installation
■
Distribution Rack Installation
Safety Precautions
Read the following safety precautions carefully to reduce the risk of
electric shock and fire.
■
All servicing should be undertaken ONLY by qualified service
personnel. There are no user serviceable parts inside the unit.
■
The CoreBuilder 7000 family ATM switch internal power supply
provides for automatic selection of either 100-120 VAC or 200-240
VAC, 60/50 Hz, as indicated on the safety label adjacent to the power
inlet. ENSURE that the available voltage supply at the mains is within
one of these two ranges.
■
DO NOT operate the unit in a location where the maximum ambient
temperature exceeds 40 degrees C.
■
Ensure that the chassis ventilation openings in the unit are NOT
BLOCKED.
■
DO NOT plug in, turn on or attempt to operate an obviously damaged
unit.
■
Unplug the power supply cord from the wall socket BEFORE
attempting to remove and/or replace the power supply.
