Filter
Top Products
6-64
1
2
3
4
5
6
7
8
9
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Spare fuse
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not use
a fuse of a higher amperage rat-
ing than recommended to avoid
causing extensive damage to the
electrical system and possibly a
fire.[EWA15131]
Specified fuses:
Main fuse:
20 A
Ignition fuse:
10 A
Signaling system fuse:
15 A
Headlight fuse:
10 A
Fuel injection system fuse:
10 A
TIP
After removing and installing the main
fuse, be sure to turn the main switch
from “ON” to “OFF” three times in three-
second intervals to initialize the idle
speed control system.
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows again,
have a Yamaha dealer check the
electrical system.
6-27
EAU34240
Replacing a headlight bulb
1
1. Headlight
This model is equipped with quartz bulb
headlights. If a headlight bulb burns out,
have a Yamaha dealer replace it and, if
necessary, adjust the headlight beam.
Headlight bulb, replacing<IXE>