Filter
Top Products
6-51
1
2
3
4
5
6
7
8
9
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
6-14
Cleaning the V-belt case air filter
element
1
2
1. V-belt air filter case cover
2. Screw
1. Remove the V-belt air filter case
cover by removing the screws.
1
2
1. Air filter element holder
2. Screw
2. Remove the filter element holder by
removing the screw.
1
1. Air filter element
3. Pull the air filter element out, and
then clean it with solvent. After
cleaning, remove the remaining
solvent by squeezing the element.
WARNING! Use only a dedicated
parts cleaning solvent. To avoid
the risk of fire or explosion, do
not use gasoline or solvents with
a low flash point.[EWA10431]
NOTICE:
To avoid damaging the
air filter element, handle it gen-
tly and carefully, and do not twist
it.[ECA10521]
4. Apply oil of the recommended type
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
TIP
The air filter element should be wet but
not dripping.
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
5. Insert the element into the air filter
case.
6. Install the filter element holder by
installing the screw.
7. Install the V-belt air filter case cover
by installing the screws.