Filter
Top Products
3-28
1
2
3
4
5
6
7
8
9
EAU1044D
INSTRUMENT AND CONTROL FUNCTIONS
3-10
Sidestand<IXE>
ment, be sure to wrap them in a plastic
bag so that they will not get wet. When
washing the vehicle, be careful not to
let any water enter the storage compart-
ment.
EAU15303
Sidestand
1
1. Sidestand
The sidestand is located on the left side
of the frame. Raise the sidestand or lower
it with your foot while holding the ve-
hicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system, which
cuts the ignition in certain situations.
(See page 3-11 for an explanation of the
ignition circuit cut-off system.)
EWA10240
w
The vehicle must not be ridden with
the sidestand down, or if the
sidestand cannot be properly moved
up (or does not stay up), otherwise
the sidestand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
Yamaha’s ignition circuit cut-off sys-
tem has been designed to assist the
operator in fulfilling the responsibil-
ity of raising the sidestand before
starting off. Therefore, check this sys-
tem regularly as described below and
have a Yamaha dealer repair it if it
does not function properly.