Filter
Top Products
13
PART NUMBERS FOR PACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS
(REFER TO PAGE 6 FOR LUBRICATION INSTRUCTIONS)
LUBRICANT TYPE OF PART NUMBERS AND
USAGE LUBRICANT PACKAGED QUANTITIES
OF LUBRICANTS
3 TON LOWER SHEAVE BEARING GREASE-GRAPHITE 40626 (1 LB., .46 Kg. CAN)
JOURNALS AND SEAT FOR HOOK KNOB MIXTURE
(3/4 AND 1-1/2 TON)
TIP OF LEVER PLUNGER AND DRY-LUBE OIL- 40628 (1 PT., .5L CAN)
THREADED END OF PINION SHAFT GRAPHITE MIXTURE
INSIDE OF LEVER HEAD GREASE 40630 (1 LB., .46 Kg. CAN)
GEARS, LIFTWHEEL SPLINE, NEEDLE
BEARINGS, PINION BUSHING, CAM AND 28610 (1 LB., .46 Kg. CAN)
LOCK PINS, CAM SLOTS, AND I.D. OF CAM GREASE 28632 (4 LB., 1.8 Kg. CAN)
THREADS OF PINION SPRAY DRY 46698 (16 OZ. CAN)
LUBRICANT
LOAD CHAIN OIL 28608 (1 PT., .5L CAN)
When ordering lubricants, specify the type of lubricant, part number and packaged quantity required.
Touch-up paint for the RS2:
*(1) case (12-12 oz. Aerosol Cans) of Yellow Touch-up Paint Part Number 40215.
*Touch-up paints are only available in case quantities.
NOTE: When painting the hoists, also order warning labels and
capacity labels that may be coating during painting.
KEY NO. PART NAME PART NUMBER
NO. REQ’D. 3/4 TON 1 1/2 TON 3 TON
673-51 1 Hook Block Screw 40854 40855 –
673-52 - Load Chain (Specify Length Req’d.) 85839 85847
673-53 1 End Ring 40471
673-54 1 Capacity Label 73759 73751 73752
673-55 1 I.D. Label 73901 73903
673-56 1 Warning Tag 73905
673-57 1 Patent Label
(no longer available order 673-55)
–
673-58 1 Load Limiter Label (Only for units 73763
with Load Limiter)
673-59 1 Load Limiter (Optional) 7310 P 7311 P 7311 P
673-60 1 Cam Washer 73316
673-61 1 Anchor Sling 7309 P 7312 P –
*673-62 1 Lower Hook with latch (Latch type) -- 40606
673-63 1 Lower Hook Washer -- 50454
673-64 1 Lower Hook Nut -- 40382
673-65 1 Lower Hook Nut Pin -- 982335
673-66 3 Lower Hook Block Screw -- 940812
673-67 3 Lower Hook Block Screw L.W. -- 940830
673-68 3 Lower Hook Block Screw Nut -- 945820
673-69 1 Reeving Caution Plate -- 45757
673-70 1 Lower Sheave -- 40166
673-71 2 Lower Hook Block -- 40689
*673-72 1 Upper Hook with latch (latch type) -- 40606
673-73 1 Upper Hook Nut -- 40382
673-74 1 Upper Hook Nut Pin -- 982335
673-75 1 Hoist Hanger -- 73324
673-76 1 Dead End Pin -- 40851
**673-77 1 Upper hook block assembly (includes 73606 73607 -
673-16,673-30 and 673-35)
673-78 2 Lock Pin 73340 73342
* If latchlok hook is required, part numbers are: 3/4 ton upper and lower hooks - 1001, 1 1/2 ton upper and lower hooks - 1002
3 ton lower hook - 1004, 3 ton upper hook - 1010
** If latchlok hook is required, contact Yale.
Manual No. Y673-A
Before installing hoist, fill in the
information below.
Model No. __________________
Serial No. __________________
Purchase Date ______________
Rated Load _________________
73907 A
Capacities: 3/4, 1-1/2, 3 ton
(750, 1500, 3000 kg.)
Follow all instructions and warnings for
inspecting, maintaining and operating this
hoist.
The use of any hoist presents some risk of personal
injury or property damage. That risk is greatly increased
if proper instructions and warnings are not followed.
Before using this hoist, each operator should become
thoroughly familiar with all warnings, instructions and
recommendations in this manual. Retain this
manual for future reference and use.
Forward this manual to operator.
Failure to operate equipment as directed in
manual may cause injury.
OPERATING,
MAINTENANCE &
PARTS MANUAL
MANUALLY LEVER
OPERATED
CHAIN HOIST
Lever Hoist
414 WEST BROADWAY AVENUE
MUSKEGON, MICHIGAN 49443
RS
22
Note: When ordering parts, always furnish rated load and serial number of hoist on which the parts are
to be used.
For the location of the nearest Yale Authorized Hoist Parts Depot, see inside front cover.
LIMITATION OF WARRANTIES, REMEDIES AND DAMAGES
THE WARRANTY STATED BELOW IS GIVEN IN PLACE OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR OTHERWISE, NO PROMISE OR AFFIRMATION
OF FACT MADE BY ANY AGENT OR REPRESENTATIVE OF
SELLER SHALL CONSTITUTE A WARRANTY BY SELLER OR
GIVE RISE TO ANY LIABILITY OR OBLIGATION.
Seller warrants that on the date of delivery to carrier the goods
are free from defects in workmanship and materials.
SELLER’S SOLE OBLIGATION IN THE EVENT OF BREACH OF
WARRANTY OR CONTRACT OR FOR NEGLIGENCE OR
OTHERWISE WITH RESPECT TO GOODS SOLD SHALL BE
EXCLUSIVELY LIMITED TO REPAIR OR REPLACEMENT,
F.O.B. SELLER’S POINT OF SHIPMENT, OFANY PARTS
WHICH SELLER DETERMINES TO HAVE BEEN DEFECTIVE or
if Seller determines that such repair or replacement is not
feasible, to a refund of the purchase price upon return of the
goods to Seller.
Any action against Seller for breach of warranty, negligence or
otherwise, must be commenced within one year after such cause
of action occurs.
NO CLAIM AGAINST SELLER FOR ANY DEFECT IN THE
GOODS SHALL BE VALID OR ENFORCEABLE UNLESS
BUYER’S WRITTEN NOTICE THEREOF IS RECEIVED BY
SELLER WITHIN ONE YEAR FROM THE DATE OF SHIPMENT.
Seller shall not be liable for any damage, injury or loss arising out
of the use of the goods if, prior to such damage, injury or loss,
such goods are (1) damaged or misused following Seller’s
delivery to carrier; (2) not maintained, inspected, or used in
compliance with applicable law and Seller’s written instructions
and recommendations; or (3) installed, repaired, altered or
modified without compliance with such law, instructions or
recommendations.
UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES AS
THOSE TERMS ARE DEFINED IN SECTION 2-715 OF THE
UNIFORM COMMERCIAL CODE.
INDEMNIFICATION AND SAFE OPERATION
Buyer shall comply with and require its employees to comply with
directions set forth in instructions and manuals furnished by Seller
and shall use and require its employees to follow such
instructions and manuals and to use reasonable care in the use
and maintenance of the goods. Buyer shall not remove or permit
anyone to remove any warning or instruction signs on the goods.
In the event of personal injury or damage to property or business
arising from the use of the goods, Buyer shall within 48 hours
thereafter give Seller written notice of such injury or damage.
Buyer shall cooperate with Seller in investigating any such injury
or damage and in the defense of any claims arising therefrom.
If Buyer fails to comply with this section or if any injury or damage
is caused, in whole or in part, by Buyer’s failure to comply with
applicable federal or state safety requirements, Buyer shall
indemnify and hold Seller harmless against any claims, loss or
expense for injury or damage arising from the use of the goods.
SS-5/2001
WARNING
ALTERATIONS OR MODIFICATIONS OF EQUIPMENT AND USE OF
NON-FACTORY REPAIR PARTS CAN LEAD TO DANGEROUS
OPERATION AND INJURY.
TO AVOID INJURY:
• DO NOT ALTER OR MODIFY EQUIPMENT
• DO USE ONLY FACTORY PROVIDED REPLACEMENT PARTS
© 2001 Yale Hoist Printed in USA
414 WEST BROADWAY AVENUE
MUSKEGON, MICHIGAN 49443
1-866-805-2962 • Fax: 1-800-742-