Filter
Top Products
ENGLISH
9
GETTING STARTED WITH YOUR WATER FLOSSER
Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Lift the reservoir lid, remove the reservoir, and fill
with lukewarm water. Replace the reservoir over
the base and press down firmly and close
the lid.
Inserting and Removing Tips
Insert tip into the center of the Water Flosser
handle, pressing down firmly until tip clicks into
place. The colored ring will be flush with the top of
the handle if the tip is correctly locked into place.
Gently pull on tip to confirm it is seated properly
and locked in place.
Toremovetipfromthehandlepushthetipeject
button on the handle. The control knob will rise,
releasing the tip. Remove the tip.
Caution:Donotpresstipejectbuttonwhileunit
is running.
Tip Insertion
Tip Removal
Remove
Fill
Replace
NO
Gap
Insert
Eject
Tip
Eject
Button