Filter
Top Products
Revision C
22 GoodKnight 420G - Patient Manual
Electrical characteristics of the power supply module
Input voltage: 100 – 240 VAC (-10%, +10%), 50 / 60 Hz (±1 Hz)
Input current: 550 mA (Egston), 600 mA (Anam).
Class II power supply:
Output voltage: 13 V – 1.85 A (Egston) / 12 V – 2 A (Anam).
Power supply provided with the device: Egston N2UFMW 24 W 13 V or Anam TA2412 24 W 12 V.
CAUTION
• Use only one of the above-mentioned specific power supplies provided with the device.
• The above-mentioned power supply modules are not intended to be repaired. In case of
failure, please contact your service provider to have the module replaced.
Electrical characteristics of the device
Input voltage: 13 V – 1.5 A.
Maximum power consumed : 20 W (without humidifier)
Current consumed at 20 cmH
2
O with a 4 mm leak: 0.750 A.
Direct current
13 V power connector
Symbols
ON/OFF
Information Access
Ramp
Increases setting values
Reduces setting values
Output connector
Device protected against the vertical falls of water drops.
Type B device
Consult the instructions for use before using this device.
0459
Device complies with the requirements of the directive 93/42/CEE relating to
medical appliances.
For USA only:
Federal law restricts this device for sale by or on the order of a physician.