Toshiba SL-5900 Scale User Manual


 
EMI-31015D
. INTRODUCTION
We thank you very much for purchasing the TEC Electronic Computing Scale SL-5900 Series.
This scale has been designed with TEC reliability and offers a cost efficient system for a modest
investment.
The SL-5900 (with thermal printer) takes advantage of the latest technology in microprocessors and
because of this, the decreased cabinet size permits the system to be placed virtually anywhere in
your store.
Your deli, and specialty departments can enjoy these high quality reliable TEC products. Improve
your operating effectiveness and watch the enhanced utilization of your front end scanning
investment. This electronic Load Cell scale eliminates all moving parts and furnishes an accurate
digital display of all information.
We believe that your needs will now be fully satisfied, and you will have total reliability in price
calculation. Should you have any questions concerning the scale, please refer to this manual. Be
sure to keep this manual for future reference.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part
15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operations of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
(for USA only)
I
Changes or modifications not expressly approved by manufacturer for compliance could void the user’s
authority to operate the equipment.
I
“This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.”
“Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel
brouilleur du Canada.”
(for CANADA only)
Safety Summary
Personal safety in handling or maintaining the equipment is extremely important. Warnings and
Cautions necessary for safe handling are included in this manual. All warnings and cautions contained
in this manual should be read and understood before handling or maintaining the equipment.
Do not attempt to effect repairs to this equipment.
If a fault occurs that cannot be rectified using the
procedures described in this manual, turn off the power, unplug the machine, then contact your
authorised TEC representative for assistance.
-l-