Toshiba e-STUDIO163/203 Microscope & Magnifier User Manual


 
3 DESCRIPTION OF THE FUNCTIONS
148 Setup
Setup
How to operate "Setup" and each function
Changing the Device Configuration
When you click Setup button, the TOSHIBA Viewer starts reading the data from the device and
displays the TOSHIBA SETUP screen.
This allows you to configure the device settings remotely using the TOSHIBA Viewer.
This can be operated from the Setup button on the Device screen.
For more details about the Device screen, see the following page.
P.119 “Changing the Device Information”
You can remotely configure the device settings using the TOSHIBA Viewer.
After clicking Setup on the Welcome screen, see the TOSHIBA Viewer retrieves the device set-
tings from the e-STUDIO163/203/165/205.
When you want to change the device settings file directly
go to Step 1.
When you want to change the device settings file by copying the settings from a set file
located on your hard disk
go to Step 2.
When you want to change the device settings file by copying the settings from a user set-
tings file stored within TOSHIBA Viewer
go to Step 3.
1
Edit the device configuration.
(1) To edit the settings, double click on the item you want to edit and enter the new data.
(2) Click the [Write Settings] button to download the new settings to your
e-STUDIO163/203/165/205.
Click the [Cancel] button to cancel adding/editing the device configuration.