Toshiba EM1-31074 Scale User Manual


 
11-21
11. PROGRAMMING PROCEDURES
11.11 DATE/TIME SETTING
11.11 DATE/TIME SETTING
Normal Mode ESB Limited Spec. Mode
Menu Group: 2 Item No.: 4
Item No.: 1
Date, time, machine number, and store code are set in this procedure.
NOTES:
1. Express the time in a 24-hour military format.
2. The SL-9000 will check details of date (time) input, and any wrong date (time) will result in an error.
Then the correct date (time) should be re-entered and press the
CLEAR
key.
3. Even when the initial Setting # 8-4, 8-5 or 8-6 is set to the “Julian Date” the way to enter the date
in the date setting operation is the same in the ordinary case.
4. The date display method can be changed by the initial setting.
11.12 CMT/PL-3
Normal Mode ESB Limited Spec. Mode
Menu Group: 2 Item No.: 5
Item No.: 2
CMT OPERATIONS
SL-9000 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the
transfer of the entire PLU file, ingredient file and other data from the SL-9000 to tapes. This can be
accomplished in number of operation steps.
In turn, information from the tape can also be transferred to another SL-9000 scale.
ENTER
ENTER ENTER
ENTER
k
k
<MENU>
Group 2
1
Set the date.
(Month, Day, Year)
Set the time.
(Hour, Minute)
Set the machine No.
(max. 6 dig.)
Set the store No.
(max. 5 dig.)
PROG.
ESC.
<MENU>
Group 2
Main
<MENU>
NOTES:
1. The error mode can be released by pressing the
CLEAR
key, and operated again through the
above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes
recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT loader.
ENTER
2
PROG.
ESC.
<MENU>
Group 2
Main
<MENU>
<MENU>
Group 2
Set the transmission items.
(Refer to table 4)
NEXT
PLU
or