Filter
Top Products
ENGLISH 8
Recalling Average Reading
The UB-328 provides an average blood pressure reading based on the
total measurements stored in memory. Press and release the Memory
(“M”) button to see the average blood pressure reading. The average
blood pressure reading will appear and the number of measurements
stored in memory appear for approximately five seconds.
Recalling Memory Data
The UB-328 automatically stores up to 30 blood pressure and pulse measurements in its memory. Measurements stored
in memory are assigned an index number in the order of the newest to the oldest. The oldest reading displays as “n01”.
To retrieve readings, follow these simple steps:
1. When the display screen is blank, press and release the Memory button. You will see the average blood pressure
reading displayed. Press and release the Memory button again.
You will see the index number of the most recent reading followed by the measurement.
2. If you want to retrieve other measurements in memory, press and release the Memory button repeatedly until the
desired index number is reached (e.g. n14). The measurement will then be displayed.
3. The display will shut off automatically a few seconds after the readings are displayed.
To clear the measurement history from memory, remove the batteries from the unit and then place the batteries back
into the battery holder.
Note:
If there are no measurements stored in memory, you will see two Os displayed vertically followed by a blinking “A00”.
Note:
Stored measurements will be lost if batteries become low or are removed.