Filter
Top Products
ENGLISH 13
Maintenance
Do not open the device. It uses delicate electronic components and an intricate air unit that could be damaged. If you
can not fix the problem using the troubleshooting instructions, request service from your supplier or from the A&D
service group. The A&D service group will provide technical information, spare parts and units to authorized suppliers.
The technical testing procedures, which should be done at least every two years, can be performed either by the
manufacturer or by an authorized repair service in accordance with the regulations governing manufacturing of medical
products.
Technical Data
Type UB-328
Measurement method Oscillometric measurement
Measurement range Pressure: 20 - 280 mmHg, Pulse: 40 - 200 beats / minute
Measurement accuracy Pressure: ±3 mmHg or 2%, whichever is greater, Pulse: ±5%
Power supply 2 x 1.5V alkaline batteries (LR03 or AAA)
Wrist circumference 13.5 – 19.5 cm
Classification Type BF
Clinical test According to ANSI / AAMI SP-10 1987
EMC IEC 60601-1-2:1993
Operating conditions +10 °C to +40 °C / 30%RH to 85 %RH
Storage conditions −10 °C to +60 °C / 30%RH to 85 %RH
Dimensions Approx. 73 [W] x 58 [H] x 79 [D] mm, excluding cuff
Weight Approx. 120 g, excluding batteries
Note:
Specifications are subject to change without prior notice.