Portable Oxygen Monitor
Teledyne Analytical Instruments iii
About This Manual
The MX300-I Operator's Manual provides both introductory and
detailed information for configuring and operating these instruments.
The manual takes you from the time you unpack the instrument until you
complete the first gas analysis. The bulk of the manual contains
operating procedures and information. There are also cautions,
warnings, and guidelines to ensure that your monitor operates normally
and to its full potential. A troubleshooting section is available to assist
you with common problems and a complete product specifications and
spare parts list is included as an appendix.
• Chapter 1: An introduction to the monitor and its
components, features and applications.
• Chapter 2: Step-by-step set-up procedures and
information.
• Chapter 3: A guide for daily operational maintenance and
troubleshooting.
• Appendix: Specifications and available spare part options
for the monitor, and detailed application
considerations to aid in troubleshooting, etc.
How To Use This Manual
This manual is designed to walk you through the initial set-up of
the MX300-I Portable Oxygen Monitor. After you have used it to
initially install your monitor, it becomes a quick reference guide to help
you with specific questions or operating problems.
Before you turning on the instrument, you are advised to read the
safety information on the next few pages and the information found in
Chapters 1 and 2. These chapters acquaint the user with the instruments
use and operation before placing it into operation.