Filter
Top Products
Specifications
CT-1/CT-2 Current Transformer
5
Table 2: General specifications (CT-1 and CT-2)
Environmental
Meets all Class IV instrument specifications
Operating Temperature 0_ C to +55_ C
Nonoperating Temperature –62_ C to +82_ C
Mechanical
Dimensions
15 mm
(0.59 in.)
38.6 mm
(1.52 in.)
10.3 mm
(0.406 in.)
6-32
mounting
stud
Connector
Hole size:
CT-1 1.78 mm (0.070 in.)
CT-2 1.32 mm (0.052 in.)
P6041 Probe cable length 106.68 mm (42 in.)
Weight 15 gm (0.525 oz.) without P6041
47 gm (1.655 oz.) with P6041
Certifications and compliances
EC Declaration of Conformity – Low
Voltage
Compliance was demonstrated to the following specification as listed in the Official Journal of
the European Communities:
Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC
EN 61010-1:1993
Safety requirements for electrical equipment for measurement, control, and laboratory use
Installation Category Descriptions Terminals on this product may have different installation category designations. The installation
categories are:
CAT III Distribution-level mains (usually permanently connected). Equipment at this level is
typically in a fixed industrial location
CAT II Local-level mains (wall sockets). Equipment at this level includes appliances, portable
tools, and similar products. Equipment is usually cord-connected
CAT I Secondary (signal level) or battery operated circuits of electronic equipment