Filter
Top Products
ALARM CLOCK WITH SNOOZE
Setting the Alarm Time
Two different alarm times can be set, Alarm 1 and Alarm 2. Use MODE to scroll to Alarm 1 (A1) or Alarm 2 (A2).
• To set Alarm 1; In normal time display, press the MODE button once and the Alarm 1 time and (A1) will show.
• Press the SET/AL button for 3-4 seconds until the alarm hour flashes
• Press UP or DOWN to set the alarm hour
• Press SET/AL and the minutes will be flashing
• Press UP or DOWN to set the alarm minutes
• Press SET/AL to lock in the settings. The alarm is now activated and the alarm bell icon
will show next
to the time.
• Press MODE to get to Alarm 2 or to return to normal time display
• If no buttons are pushed within 20 seconds, the unit will revert to the normal time display automatically
• To set Alarm 2; When Alarm 2 (A2) is showing on the display, follow the same setup sequence as for Alarm 1.
De-activating the Alarm
To de-activate an alarm, press MODE to choose the alarm (A1 or A2) that you want to de-activate. Press SET/AL until
the alarm bell icon is no longer showing. Your alarm time settings will remain and you can re-activate the alarm by
following the instructions below.
Activating the Alarm
Press the MODE button to choose the alarm (A1 or A2) that you want to activate. Press SET/AL to activate (the alarm
bell icon and 1 or 2 will show). The alarm will sound at the time you have entered.
Silencing the Alarm
• When the alarm sounds press any button on the base station to silence the alert or press SNOOZE to activate the
snooze function
• When snooze is activated the Zzz symbol will appear and the alarm will sound again in 5 minutes
• When the alarm sounds again, press SNOOZE to continue the snooze function or press any button on the base station
to discontinue snooze
• The alarm icon will remain on the display and the alarm will sound every day at the pre-set time until the alarm is de-
activated
MAX / MIN MEMORY
Use the MAX/MIN button to display the highest and lowest indoor and outdoor temperature and humidity readings since
the last reset.
• Press MAX/MIN once to display the highest readings recorded since last reset. MAX is shown on the display.
• Press MAX/MIN a second time to display the lowest readings recorded since last reset. MIN is shown on the display.
• Press MAX/MIN to return to the normal display
• To clear and reset the max/min records, when either the MAX or MIN record is shown on the LCD display, press and
hold MAX/MIN for 3-4 seconds until the beep sounds
TEMPERATURE ALERTS
You can program your weather center to sound an alert whenever the indoor or outdoor temperature exceeds the upper or
lower pre-set level. The outdoor alert can be set for any remote channel.
Setting the Indoor Temperature Alert
• Press and hold the ALERT button for 3-4 seconds. The high temperature limit icon
and indoor temperature will
be flashing.
• Press UP or DOWN to select the high temperature alert level
• Press ALERT and the low temperature limit icon
and temperature will be flashing
Page 4