Taylor 3843 Scale User Manual


 
To Save Nutritional Values into Memory
To Recall Memory
To Clear Memory
Function Buttons
Nutrition Buttons
1. Follow steps 1 – 6 of the 'To Display Nutritional Values' section.
2. Press the “M+” button to add the food item being weighed to memory.
3.M01” will be shown at the upper right corner of the display to indicate that one
set of values has been saved to memory. To add additional food items to
memory, repeat the previous steps.
NOTE: The memory is saved permanently, even if the scale is switched off except
when the batteries are removed.
NOTE: The maximum number of food items that can be added to the memory is
99. When the memory number reaches 99 the display will show “nutFl“. The
memory must be cleared by following the instructions in the 'To Clear Memory'
section.
1. Press the “MR” button to see the total ingredients of the food items stored to
memory.
2. Ó is displayed next to the memory number indicator to indicate that the total
memory is being displayed.
3. Press a nutrition button to view a nutrition value for the food item stored in
memory. NOTE: It is not possible to display the total weight of the food items
stored to memory.
1. Press the "MR" button.
2. Press the "C/MC" button.
3. The memory is cleared when the memory indicator and memory number are no
longer displayed. NOTE: the scale can only store up to 99 foods in memory. If
over 99 items are stored, the display will show “nutFl” .Press MC to clear the
memory.
• Kcal = Calorie content (calories)
• Sod = Sodium content (mg)
• Fib = Fiber content (g)
• Chol = Cholesterol content (mg)
• Prot = Protein content (g)
• Carb = Carbohydrate content (g)
• Fat = Fat content (g)
or off and set weight to zero
M+ = Save nutritional values to
memory (up to a maximum of 99
values)
MR = Recall the total nutritional
values stored in memory
C/MC = Clear all memories or
clear food code
g/oz/lb = Switch between
lb:oz/g/kg
On/Tare/OFF = Switch scale on
4