Filter
Top Products
CARE AND MAINTENANCE
A. The gun may be cleaned and lubricated under normal conditions
without the need of any disassembly.
B. In special conditions, such as repairs, when disassembling is neces-
sary, it is recommended the gun be returned to the factory or sent to a
competent gunsmith or to the importer.
C. In order to keep a gun in perfect condition it must be kept clean and
covered with a slight film of good quality oil to prevent corrosion. This is
specially necessary after use.
D. For normal cleaning of handgun not used or kept in storage for some
time, it is necessary to rub it with a lightly oiled cloth. In the same way
proceed with the bore of the barrel. The excess oil must be removed, but
a thin protecting film should remain. Also the dust should be removed
from all crevices with a small, clean brush.
E. For cleaning after shooting, it is of special importance that all residues
of powder be removed from barrel and other adjacent areas subject to
such deposits, using an appropriate brush. If particles of lead are detected
in barrel they must be scrubbed with a brass brush, drenched with oil.
Once cleaned, lubrication should be done as above described.
F. Do not keep handguns in contact with materials that attract moisture or
possess a certain degree of acidity, or in environments with great variation
of temperature or of humidity. Avoid the use of holsters of cloth or of any
other material except natural leather appropriately cured.
G. If the weapon is to be stored for a long period of time, extreme care
should be taken with metal surfaces, in order to protect them against
corrosion.
13