Filter
Top Products
GB
10
d
d
d
d
d
d
d
d
d
1. Standard Weighing Procedures
2.Tare Weighing
3.Cancellation of Tare Weighing Function
1. Turn on the power by pressing the key.
2. After all the segments flash, [0.0kg] is displayed.
3. Step onto the center of the scale platform.
The weight reading will be displayed.
4. Measurement is completed.
When the person being weighed steps off the scale, the display will return to [0.0kg].
Turn off the power by pressing the key.
1. Turn on the power by pressing the key.
2. After all the segments flash, [0.0kg] is displayed.
3. Carefully place the tare items (clothes, etc.) on the center of the platform.
The weight of the items will be displayed.
4. Press the key.
An arrow t[NET] will appear next to the mark and [0.0kg] will be displayed.
5. When weighing a person/object including tare items, the weight of the person/object minus that
of the tare items, which is the net weight, will be displayed.
ƽ
•
To change the tare weight, cancel the tare weighing function and repeat from step 3.
•
When using the tare weighing function, the measurement range is reduced by the tare weight.
(Measurement Range) = (Maximum Measurable Weight) – (Tare Weight)
1. Remove the tare items (clothes, etc.) from the platform.
The weight will be displayed as a negative value.
2. Press the key.
The arrow tnext to the [NET] will disappear and [0.0kg] will be displayed.
3.Operating Instructions
GB
d
d
d
d
d
d
d
d
4.BMI Calculation:
1. Turn on the power by pressing the key.
2. After all the segments flash, [0.0kg] is displayed.
3. Push for within two seconds.
[0.0kg] and the default height [170cm] will be displayed.
4. Set your height with the key.
(This can also be entered after you step on the scale).
Stand still on the scale platform.
The weight will be displayed.
5. Once your height and weight have been established, press .
The weight and BMI figure will be displayed.
* By pressing the key in BMI mode, the scale will switch alternately between BMI and
height (and can be changed with the key) display.
* The display will return to [0.0 kg] and the default height [170cm], if it changes to a height
display after stepping off the scale during measuring BMI.
Guidelines based on NIH/WHO BMI
Under Weight
Normal Range
Pre obese
Obese
Obese
Obese
CLASS
l
CLASS ll
CLASS lll
BMI 18.5
18.5
BMI 25
25
BMI 30
30
BMI 35
35
BMI 40
BMI
40
11